Product Description
Ampire CPS090 22.9 cm (9″) Smartphone Mirror Display with Dual AHD Dash Camera and RFK Function
Would you like to retrofit Apple CarPlay or Android Auto to your factory car radio without a screen? Then the CPS090 smartphone mirror display is just the right product. This high-resolution 9-inch touchscreen allows you to integrate your smartphone into almost any vehicle and also display an optional rearview camera.
The CPS090 smartphone mirror display with built-in smartphone interface is compatible with wireless Apple CarPlay® and Android Auto (please note the minimum requirements) and is therefore a smarter and safer way to use your smartphone in the car.
Everything is controlled via the smart voice control Siri or OK Google, or on the 9-inch touchscreen, which you can securely fasten in front of the mirror with the supplied elastic straps.
Whatever you want to do with your smartphone while driving, you can do it directly on this screen using Apple CarPlay® or Android Auto. You can easily get directions or send and receive messages. While navigating, you can listen to your favorite music, for example via Spotify or your favorite station via a radio app, and concentrate on the road.
Just connect your smartphone wirelessly to our display via WiFi and get started. Audio playback is fed via the AUX audio input (3.5 mm jack plug) of your factory car radio. If your vehicle has A2DP Bluetooth audio streaming as standard, you can send the CPS090's audio directly to your radio via Bluetooth without bypasses and without loss of quality. Alternatively, it is also a built-in FM transmitter, which can send the sound as an FM signal and be received by your car radio. There is also a small speaker built into the housing that can play, for example, navigation messages.
TECHNICAL DATA
DISPLAY
– 9″ IPS LCD touch screen
– 8.8″ / 22.4 cm visible diagonal
– 36:9 aspect ratio
– Touch screen operation
– Adjustable LED backlight
– Ultra High Resolution 1280 x 320
– Brightness 750cd/m²
– Contrast 1000:1
– Clock frequency 60Hz
– 130° vertical viewing angle
– 150° horizontal viewing angle
– Our monitors are subject to ISO 9241-307, pixel error class II
SMARTPHONE INTEGRATION
Wireless Apple CarPlay
Minimum requirement: iPhone 5 and up. CPS090 can connect to Apple CarPlay only wirelessly and not via USB cable.
Wireless Android Auto
Minimum requirements: Android 11, Android Auto 4.8 and 5 GHz Wi-Fi*
*IEE standards 802.11a, 802.11ac, 802.11ax, 802.11be & 802.11n
DANGER! Devices that only have 2.4 GHz WLAN are not supported and not compatible!
CPS090 can connect to Android Auto only wirelessly and not via USB cable.
Bluetooth
Pair your smartphone with the CPS090, then connect your smartphone to your car radio's Bluetooth. The CarPlay or Android Auto audio is then sent directly and without bypasses from your smartphone to the car radio* via Bluetooth A2DP.
(*A2DP Bluetooth enabled car radio required.)
AHD dual dash camera
Built-in front camera on the back of the screen
– High Definition Analog
– 1080p (resolution 1920 x 1080 pixels)
– 30 FPS frame rate
– Viewing angle: 120° horizontal, 145° diagonal
Rear system camera
– High Definition Analog
– 1080p (resolution 1920 x 1080 pixels)
– 30 FPS frame rate
– Viewing angle: 120° horizontal, 145° diagonal
– MINI-DIN 4P system plug
– Dimensions without butterfly case: 23 x 23 x 32 mm
Recording machine
– Recording resolution: 1080p+1080p or 720p+720p (adjustable)
– Segment length: 1 minute, 3 minutes, 5 minutes
– Audio recording can be activated
– Parking function with motion detection and time-lapse recording. 12h or 24h adjustable, undervoltage protection at 11.8V
– Memory card type: microSD (not included)
– microSD Speed Class: Class 10 or higher
– microSD storage capacity: min. 32 GB up to max. 256 GB
– Recording capacities: 32 GB approx. 4.5 hours, 64 GB approx. 9.5 hours, 128 GB approx. 19 hours, 256 GB approx. 38 hours, then older recordings are overwritten.
– Activation delay (ACC ON): 17 seconds
– Activation delay in parking mode: 0 seconds
– Deactivation delay (ACC OFF): 15 seconds
BACKUP CAMERA
– The system's rear camera is used as a reversing camera. No need to install another reversing camera.
– 12 volt switching input for activation
– Instantly switch to the system's rear camera in full screen with guidelines when reverse is engaged
– Guide lines can be adjusted individually
– 3 second off delay when reverse is disengaged
– Dashcam recording mode is not interrupted in rear camera mode
– Normal/mirror image playback can be set
AUDIO OUTPUT
– Stereo audio output with 3.5 mm jack cable
– Bluetooth A2DP audio streaming of all CarPlay and Android Auto content directly from your smartphone. No additional application is required.
– FM transmitter for alternative audio playback (87 – 108 MHz.)
– Built-in 2 watt speaker with its own enclosure
DIFFERENCE
– LINUX 4.9 OS with 1 GB memory
– Apple CarPlay and Android Auto in full-screen mode or in half-screen mode with simultaneous camera display (selectable)
– SD card reader (Mirco SD)
– USB-C input for power
– USB-C power cable with ACC ignition logic
– Menu languages: DE, EN, CN, RU, ES, FR, IT, PT, JPN and KOR.
– automatic activation when operating voltage is applied
– Operating voltage 9V – 36V DC
– Current consumption ACC ON: 590mA@12VDC
– Current consumption ACC OFF: 8mA@12VDC
– Current consumption in parking mode: 250mA@12VDC
– Operating temperature: -20° to 70°C
– Storage temperature: -30° to 80°C
– Screen dimensions: 260 x 73 x 23 mm (40 mm with front camera)
– System hack camera dimensions: 23 x 23 x 32 mm
– Screen weight: 328g
FIELD OF DELIVERY
– 9″ (22.9 cm) touch screen.
– two special tires
– USB-C connection cable for power supply with +12V, ground and ignition (ACC), 320 cm
– Rear system AHD camera, 1080p, with butterfly mount and 50 cm cable
– Connection cable for rear system camera, 700cm
– Audio output connection cable (3.5mm plug), 120cm
OPTIONAL ACCESSORIES
AK1023 Reversing Camera Extension Cable
MICRO-SD32G-SANDISK-MAX memory card with 32GB